This and that, front alignment, touch up and transmission leak.

Afternoon Stagnator Fans, I'm hoping that I can post to the blog now, don't know whats changed but yesterday the pictures were all up loaded in computer speak and I couldn't anotate them. We'll see what happens today. Today I decided I had better get a rough alignment done on the front so I got my super duper alignment jig out and did a preliminary set on the toe in. Will need to drive it a bit to see if it's close and the steering wheel is straight. Then I noticed that the back of the transmission has a leak at the spedometer drive, I suspect that the seal has gone south and it should be pretty easy to replace if Bill can get it for me. Aside from that I decided the missing undercoating needed repair so I sprayed the damaged areas with rubberized undercoat, not as thick as the stuff thats there but will give some protection to the areas in question. Well, that's interesting. Now I can't upload pictures. I may have to look for another blogging site if this one continues to be such a challenge.

Comments

Post a Comment

Popular posts from this blog

Carburetors

Image
Not a lot of text tonight and Bill knows the reason, we had a nice dinner with a few folks and are mourning the eminent departure of our friend Jim H. I may have found an 'O' ring that will work for the intake manifold-I hope as the original is way past it's use by date as are all the 'O' rings and gaskets on these carburetors. Disassembled carb, sure hope I can remember how it goes together That's all, I have a puppy demanding my attention now, he's been ignored all day-poor guy! Cheers, Lynn 3 hrs  
Read more

The Good, the bad, and the ugly

Image
Well, the god was that the carburetors are installed and the car started and ran well. The bad?  Take a look at this picture of the rear wheel. The ugly? installing the tires is a son of a gun, took me a couple of hours to get the tire and tube on only to have the tube blow out when I inflated it.  I was careful to use talc and avoid pinching the tube but something happened as I don't think it should have blown at 36-38 psi?  I guess it's better to have it blow now than when it's on the road to Colorado.  That being said I think we'd (Bill) better find a competent shop to install these tires/tubes. Three broken spokes in a row Looked pretty good after cleaning them up. Well, that's all folks!   Wish someone could have caught a picture of my expression when the GD tube blew.   Cheers, Lynn  
Read more

The Stagnator goes home

Image
This will likely be the last time I post on this blog site as it has become problematic for me at least. Won't let me post picture or if I post pictures it won't allow me to describe them. Don't know what happened but.... At any rate the Stag is gone and Bill seems happy with all that was done to it. I took the car out for a test drive and I enjoyed it, the steering is a little loose and the column probably needs new bushings but the car was solid and the little V8 sounds fantastic. If Bill can get the parts before we leave for Colorado I will fix the speedometer drive leak but other than that I think it will make the trip-I hope!
Read more